docker-unrealircd/conf/unrealircd.conf.example

/* Configuration file for UnrealIRCd 5
 *
 * Simply copy this file to your conf/ directory, call it
 * 'unrealircd.conf' and walk through it line by line (edit it!)
 *
 * Important: All lines, except { and } end with an ;
 * This is very important, if you miss a ; somewhere then the
 * configuration file parser will complain and the file will not
 * be processed correctly!
 * If this is your first experience with an UnrealIRCd configuration
 * file then we really recommend you to read a little about the syntax,
 * this only takes a few minutes and will help you a lot:
 * https://www.unrealircd.org/docs/Configuration#Configuration_file_syntax
 *
 * UnrealIRCd 5 documentation (very extensive!):
 * https://www.unrealircd.org/docs/UnrealIRCd_5_documentation
 *
 * Frequently Asked Questions:
 * https://www.unrealircd.org/docs/FAQ
 *
 */

/* This is a comment, all text here is ignored (comment type #1) */
// This is also a comment, this line is ignored (comment type #2)
# This is also a comment, again this line is ignored (comment type #3)

/* UnrealIRCd makes heavy use of modules. Modules allow you to completely
 * customize the featureset you wish to enable in UnrealIRCd.
 * See: https://www.unrealircd.org/docs/Modules
 *
 * By using the include below we instruct the IRCd to read the file
 * 'modules.default.conf' which will load more than 150 modules
 * shipped with UnrealIRCd. In other words: this will simply load
 * all the available features in UnrealIRCd.
 * If you are setting up UnrealIRCd for the first time we suggest you
 * use this. Then, when everything is up and running you can come
 * back later to customize the list (if you wish).
 */
include "modules.default.conf";

/* Now let's include some other files as well:
 * - help/help.conf for our on-IRC /HELPOP system
 * - badwords.conf for channel and user mode +G
 * - spamfilter.conf as an example for spamfilter usage
 *   (commented out)
 * - operclass.default.conf contains some good operclasses which
 *   you can use in your oper blocks.
 */
include "help/help.conf";
include "badwords.conf";
//include "spamfilter.conf";
include "operclass.default.conf";

/* This is the me { } block which basically says who we are.
 * It defines our server name, some information line and an unique "sid".
 * The server id (sid) must start with a digit followed by two digits or
 * letters. The sid must be unique for your IRC network (each server should
 * have it's own sid).
 */
me {
	name "irc.example.org";
	info "ExampleNET Server";
	sid "001";
}

/* The admin { } block defines what users will see if they type /ADMIN.
 * It normally contains information on how to contact the administrator.
 */
admin {
	"Bob Smith";
	"bob";
	"email@example.org";
}

/* Clients and servers are put in class { } blocks, we define them here.
 * Class blocks consist of the following items:
 * - pingfreq: how often to ping a user / server (in seconds)
 * - connfreq: how often we try to connect to this server (in seconds)
 * - sendq: the maximum queue size for a connection
 * - recvq: maximum receive queue from a connection (flood control)
 */

/* Client class with good defaults */
class clients
{
	pingfreq 90;
	maxclients 1000;
	sendq 200k;
	recvq 8000;
}

/* Special class for IRCOps with higher limits */
class opers
{
	pingfreq 90;
	maxclients 50;
	sendq 1M;
	recvq 8000;
}

/* Server class with good defaults */
class servers
{
	pingfreq 60;
	connfreq 15; /* try to connect every 15 seconds */
	maxclients 10; /* max servers */
	sendq 20M;
}

/* Allow blocks define which clients may connect to this server.
 * This allows you to add a server password or restrict the server to
 * specific IP's only. You also configure the maximum connections
 * allowed per IP here.
 * See also: https://www.unrealircd.org/docs/Allow_block
 */

/* Allow everyone in, but only 3 connections per IP */
allow {
	mask *;
	class clients;
	maxperip 3;
}

/* Example of a special allow block on a specific IP:
 * Requires users on that IP to connect with a password. If the password
 * is correct then it permits 20 connections on that IP.
 */
allow {
	mask 192.0.2.1;
	class clients;
	password "somesecretpasswd";
	maxperip 20;
}

/* Oper blocks define your IRC Operators.
 * IRC Operators are people who have "extra rights" compared to others,
 * for example they may /KILL other people, initiate server linking,
 * /JOIN channels even though they are banned, etc.
 *
 * For more information about becoming an IRCOp and how to do admin
 * tasks, see: https://www.unrealircd.org/docs/IRCOp_guide
 *
 * For details regarding the oper { } block itself, see
 * https://www.unrealircd.org/docs/Oper_block
 */

/* Here is an example oper block for 'bobsmith' with password 'test'.
 * You MUST change this!!
 */
oper bobsmith {
	class opers;
	mask *@*;
	password "test123";
	/* Oper permissions are defined in an 'operclass' block.
	 * See https://www.unrealircd.org/docs/Operclass_block
	 * UnrealIRCd ships with a number of default blocks, see
	 * the article for a full list. We choose 'netadmin' here.
	 */
	operclass netadmin;
	swhois "is a Network Administrator";
	vhost netadmin.example.org;
}

/* Listen blocks define the ports where the server should listen on.
 * In other words: the ports that clients and servers may use to
 * connect to this server.
 *
 * Syntax:
 * listen {
 * {
 *   ip <ip>;
 *   port <port>;
 *   options {
 *     <options....>;
 *   }
 * }
 */

/* Standard IRC port 6667 */
listen {
	ip *;
	port 6667;
}

/* Standard IRC SSL/TLS port 6697 */
listen {
	ip *;
	port 6697;
	options { tls; }
}

/* Special SSL/TLS servers-only port for linking */
listen {
	ip *;
	port 6900;
	options { tls; serversonly; }
}

/* NOTE: If you are on an IRCd shell with multiple IP's and you use
 *       the above listen { } blocks then you will likely get an
 *       'Address already in use' error and the ircd won't start.
 *       This means you MUST bind to a specific IP instead of '*' like:
 *       listen { ip 1.2.3.4; port 6667; }
 *       Of course, replace the IP with the IP that was assigned to you.
 */

/*
 * Link blocks allow you to link multiple servers together to form a network.
 * See https://www.unrealircd.org/docs/Tutorial:_Linking_servers
 */
link hub.example.org
{
	incoming {
		mask *@something;
	}

	outgoing {
		bind-ip *; /* or explicitly an IP */
		hostname hub.example.org;
		port 6900;
		options { tls; }
	}

	/* We use the SPKI fingerprint of the other server for authentication.
	 * Run './unrealircd spkifp' on the other side to get it.
	 */
	password "AABBCCDDEEFFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUV=" { spkifp; }

	class servers;
}

/* The link block for services is usually much simpler.
 * For more information about what Services are,
 * see https://www.unrealircd.org/docs/Services
 */
link services.example.org
{
	incoming {
		mask 127.0.0.1;
	}

	password "changemeplease";

	class servers;
}

/* U-lines give other servers (even) more power/commands.
 * If you use services you must add them here.
 * NEVER put the name of an UnrealIRCd server here!!!
 */
ulines {
	services.example.org;
}

/* Here you can add a password for the IRCOp-only /DIE and /RESTART commands.
 * This is mainly meant to provide a little protection against accidental
 * restarts and server kills.
 */
drpass {
	restart "restart";
	die "die";
}

/* The log block defines what should be logged and to what file.
 * See also https://www.unrealircd.org/docs/Log_block
 */

/* This is a good default, it logs everything */
log "ircd.log" {
	flags {
		oper;
		connects;
		server-connects;
		kills;
		errors;
		flood;
		sadmin-commands;
		chg-commands;
		oper-override;
		tkl;
		spamfilter;
	}
}

/* With "aliases" you can create an alias like /SOMETHING to send a message to
 * some user or bot. They are usually used for services.
 *
 * We have a number of pre-set alias files, check out the alias/ directory.
 * As an example, here we include all aliases used for anope services.
 */
include "aliases/anope.conf";

/* Ban nick names so they cannot be used by regular users */
ban nick {
	mask "*C*h*a*n*S*e*r*v*";
	reason "Reserved for Services";
}

/* Ban ip.
 * Note that you normally use /KLINE, /GLINE and /ZLINE for this.
 */
ban ip {
	mask 195.86.232.81;
	reason "Hate you";
}

/* Ban server - if we see this server linked to someone then we delink */
ban server {
	mask eris.berkeley.edu;
	reason "Get out of here.";
}

/* Ban user - just as an example, you normally use /KLINE or /GLINE for this */
ban user {
	mask *tirc@*.saturn.bbn.com;
	reason "Idiot";
}

/* Ban realname allows you to ban clients based on their 'real name'
 * or 'gecos' field.
 */
ban realname {
	mask "Swat Team";
	reason "mIRKFORCE";
}

ban realname {
	mask "sub7server";
	reason "sub7";
}

/* Ban and TKL exceptions. Allows you to exempt users / machines from
 * KLINE, GLINE, etc.
 * If you are an IRCOp with a static IP (and no untrusted persons on that IP)
 * then we suggest you add yourself here. That way you can always get in
 * even if you accidentally place a *LINE ban on yourself.
 */

/* except ban protects you from KLINE and ZLINE */
except ban {
	mask *@192.0.2.1;
	// you may add more mask entries here..
}

/* except ban with type 'all' protects you from GLINE, GZLINE, QLINE, SHUN */
except ban {
	mask *@192.0.2.1;
	type all;
}

/* With deny dcc blocks you can ban filenames for DCC */
deny dcc {
	filename "*sub7*";
	reason "Possible Sub7 Virus";
}

/* deny channel allows you to ban a channel (mask) entirely */
deny channel {
	channel "*warez*";
	reason "Warez is illegal";
	class "clients";
}

/* VHosts (Virtual Hosts) allow users to acquire a different host.
 * See https://www.unrealircd.org/docs/Vhost_block
 */

/* Example vhost which you can use. On IRC type: /VHOST test test
 * NOTE: only people with an 'unrealircd.com' host may use it so
 *       be sure to change the vhost::mask before you test.
 */
vhost {
	vhost i.hate.microsefrs.com;
	mask *@unrealircd.com;
	login "test";
	password "test";
}

/* Blacklist blocks will query an external DNS Blacklist service
 * whenever a user connects, to see if the IP address is known
 * to cause drone attacks, is a known hacked machine, etc.
 * Documentation: https://www.unrealircd.org/docs/Blacklist_block
 * Or just have a look at the blocks below.
 */

/* DroneBL, probably the most popular blacklist used by IRC Servers.
 * See https://dronebl.org/ for their documentation and the
 * meaning of the reply types. At time of writing we use types:
 * 3: IRC Drone, 5: Bottler, 6: Unknown spambot or drone,
 * 7: DDoS Drone, 8: SOCKS Proxy, 9: HTTP Proxy, 10: ProxyChain,
 * 11: Web Page Proxy, 12: Open DNS Resolver, 13: Brute force attackers,
 * 14: Open Wingate Proxy, 15: Compromised router / gateway,
 * 16: Autorooting worms.
 */
blacklist dronebl {
        dns {
                name dnsbl.dronebl.org;
                type record;
                reply { 3; 5; 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; }
        }
        action gline;
        ban-time 24h;
        reason "Proxy/Drone detected. Check https://dronebl.org/lookup?ip=$ip for details.";
}

/* EFnetRBL, see https://rbl.efnetrbl.org/ for documentation
 * and the meaning of the reply types.
 * At time of writing: 1 is open proxy, 4 is TOR, 5 is drones/flooding.
 *
 * NOTE: If you want to permit TOR proxies on your server, then
 *       you need to remove the '4;' below in the reply section.
 */
blacklist efnetrbl {
        dns {
                name rbl.efnetrbl.org;
                type record;
                reply { 1; 4; 5; }
        }
        action gline;
        ban-time 24h;
        reason "Proxy/Drone/TOR detected. Check https://rbl.efnetrbl.org/?i=$ip for details.";
}

/* You can include other configuration files */
/* include "klines.conf"; */

/* Network configuration */
set {
	network-name 		"ExampleNET";
	default-server 		"irc.example.org";
	services-server 	"services.example.org";
	stats-server 		"stats.example.org";
	help-channel 		"#Help";
	hiddenhost-prefix	"Clk";
	prefix-quit 		"Quit";

	/* Cloak keys should be the same at all servers on the network.
	 * They are used for generating masked hosts and should be kept secret.
	 * The keys should be 3 random strings of 50-100 characters
	 * and must consist of lowcase (a-z), upcase (A-Z) and digits (0-9).
	 * HINT: On *NIX, you can run './unrealircd gencloak' in your shell to let
	 *       UnrealIRCd generate 3 random strings for you.
	 */
	cloak-keys {
		"aoAr1HnR6gl3sJ7hVz4Zb7x4YwpW";
		"aoAr1HnR6gl3sJ7hVz4Zb7x4Yw11";
		"aoAr1HnR6gl3sJ7hVz4Zb7x4Yw22";
	}
}

/* Server specific configuration */

set {
	kline-address "help@stuzer.link"; /* e-mail or URL shown when a user is banned */
	modes-on-connect "+ixw"; /* when users connect, they will get these user modes */
	modes-on-oper "+xws"; /* when someone becomes IRCOp they'll get these modes */
	modes-on-join "+nt"; /* default channel modes when a new channel is created */
	oper-auto-join "#opers"; /* IRCOps are auto-joined to this channel */
	options {
		hide-ulines; /* hide U-lines in /MAP and /LINKS */
		show-connect-info; /* show "looking up your hostname" messages on connect */
	}

	maxchannelsperuser 10; /* maximum number of channels a user may /JOIN */

	/* The minimum time a user must be connected before being allowed to
	 * use a QUIT message. This will hopefully help stop spam.
	 */
	anti-spam-quit-message-time 10s;

	/* Or simply set a static quit, meaning any /QUIT reason is ignored */
	/* static-quit "Client quit";	*/

	/* static-part does the same for /PART */
	/* static-part yes; */

	/* Flood protection:
	 * There are lots of settings for this and most have good defaults.
	 * See https://www.unrealircd.org/docs/Set_block#set::anti-flood
	 */
	anti-flood {
	}

	/* Settings for spam filter */
	spamfilter {
		ban-time 1d; /* default duration of a *LINE ban set by spamfilter */
		ban-reason "Spam/Advertising"; /* default reason */
		virus-help-channel "#help"; /* channel to use for 'viruschan' action */
		/* except "#help"; channel to exempt from Spamfilter */
	}

	/* Restrict certain commands.
	 * See https://www.unrealircd.org/docs/Set_block#set::restrict-commands
	 */
	restrict-commands {
		list {
			connect-delay 60;
			exempt-identified yes;
			exempt-reputation-score 24;
		}
		invite {
			connect-delay 120;
			exempt-identified yes;
			exempt-reputation-score 24;
		}
		/* In addition to the ability to restrict any command,
		 * such as shown above. There are also 4 special types
		 * that you can restrict. These are "private-message",
		 * "private-notice", "channel-message" and "channel-notice".
		 * They are commented out (disabled) in this example:
		 */
		//private-message {
		//	connect-delay 10;
		//}
		//private-notice {
		//	connect-delay 10;
		//}
	}
}

/*
 * The following will configure connection throttling of "unknown users".
 *
 * When UnrealIRCd detects a high number of users connecting from IP addresses
 * that have not been seen before, then connections from new IP's are rejected
 * above the set rate. For example at 10:60 only 10 users per minute can connect
 * that have not been seen before. Known IP addresses can always get in,
 * regardless of the set rate. Same for users who login using SASL.
 *
 * See also https://www.unrealircd.org/docs/Connthrottle for details.
 * Or just keep reading the default configuration settings below:
 */

set {
	connthrottle {
		/* First we must configure what we call "known users".
		 * By default these are users on IP addresses that have
		 * a score of 24 or higher. A score of 24 means that the
		 * IP was connected to this network for at least 2 hours
		 * in the past month (or minimum 1 hour if registered).
		 * The sasl-bypass option is another setting. It means
		 * that users who authenticate to services via SASL
		 * are considered known users as well.
		 * Users in the "known-users" group (either by reputation
		 * or by SASL) are always allowed in by this module.
		 */
		known-users {
			minimum-reputation-score 24;
			sasl-bypass yes;
		}

		/* New users are all users that do not belong in the
		 * known-users group. They are considered "new" and in
		 * case of a high number of such new users connecting
		 * they are subject to connection rate limiting.
		 * By default the rate is 20 new local users per minute
		 * and 30 new global users per minute.
		 */
		new-users {
			local-throttle 20:60;
			global-throttle 30:60;
		}

		/* This configures when this module will NOT be active.
		 * The default settings will disable the module when:
		 * - The reputation module has been running for less than
		 *   a week. If running less than 1 week then there is
		 *   insufficient data to consider who is a "known user".
		 * - The server has just been booted up (first 3 minutes).
		 */
		disabled-when {
			reputation-gathering 1w;
			start-delay 3m;
		}
	}
}

/* Finally, you may wish to have a MOTD (Message of the Day), this can be
 * done by creating an 'ircd.motd' text file in your conf/ directory.
 * This file will be shown to your users on connect.
 * For more information see https://www.unrealircd.org/docs/MOTD_and_Rules
 */

/*
 * Problems or need more help?
 * 1) https://www.unrealircd.org/docs/UnrealIRCd_4_documentation
 * 2) https://www.unrealircd.org/docs/FAQ <- answers 80% of your questions!
 * 3) If you are still having problems then you can get support:
 *    - Forums: https://forums.unrealircd.org/
 *    - IRC: irc.unrealircd.org (SSL on port 6697) / #unreal-support
 *    Note that we require you to read the documentation and FAQ first!
 */